If you'd like to ensure optimal performance in joining metal parts, then it is high time to invest in these Solution Welding Flux-Cored Rods, the strongest, quickest and simplest aluminum fabrication or parts repair - no expensive tools needed.
It does the impossible. They feature a unique design that allows it to flow easily under low working temperature, ensuring fast & precise application. Makes clean joints with no slag to ensure a durable finish on all projects.
Extreme performance. By design. These are handy tools that can powerfully work its way through dirt, rust, & painted surfaces, helping you produce a sound joint on the base metalwithout the need for costly equipment. It does not emit gases or toxins, nor does it contain any led which makes the rods absolutely safe to use.
From Amateur to Pro. The rods even offer the versatility of working on both thin & thick metals, so they areperfect to use for welding sheet metals, heavy plates, and just about anything in between. Features a combination of tensile & compression strength that makes your repair or fabrication stronger than the parent metal.
Thoroughly clean the area you’re about to weld by brushing the base. 2. Heat the area to be welded evenly. 3. As you heat the base, rub the rod vigorously against the heated piece to be welded until the rod starts flowing.
Caution: Never apply heat directly to the rod, as it breaks down and, if you manage to melt the rod directly, the weld will be easily breakable. Remember, melting the rod directly is the wrong way and makes dented welds.
You spoke and we heard. All aspects of the welding rods are engineered for the pursuit of performance to be the best in the world when repairing aluminum and other non-ferrous materials.
Just a few of the many parts that can be easily repaired!
✔️Cast iron heads
✔️A / C Lines
✔️Pot Metal Parts
✔️ Condenser lines
✔️ Cavitation plates
The easy to melt solder rods are special high-quality rods, used mainly for welding / brazing aluminum and aluminum alloys. However, they can also be used for hard welding of non-ferrous metals, except stainless steel.
Recommended for welding aluminum alloys: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005 and cast alloys 710.0 and 711.0
Applications include loading areas, loading ramps, docks, diamond plates, irrigation lines, engine blocks, gearboxes, etc.
Prepared for minor repairs. For repairs that would compromise safety if not repaired, we recommend replacing parts completely, rather than repairing them.
Melting temperature: <480 ° C (896 ° F)
No gas or toxin leakage, no lead material included.
Excellent corrosion resistance
Minimize distortion of the starting material during welding.
Size: 50cm x 1.6mm. (According to manual measurement, there may be a slight deviation.)
1 X Solution Welding Flux-Cored Rods (10pcs) OR
1 X Solution Welding Flux-Cored Rods (30pcs) OR
1 X Solution Welding Flux-Cored Rods (50pcs) OR
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.